Our Top Picks
ASUS TUF Gaming GeForce RTX™ 5080 16GB GDDR7RTX5080|OC13.7 x 5.7 x 2.8 Inches5 poundsCheck on Amazon
Thinking about playing Tom Clancy’s The Division 2 on PC and wondering what hardware you actually need? Despite its detailed, densely built open world, this is not a punishing game to run. The official minimum spec asks for a GeForce GTX 780 or Radeon R9 280X-class card with 8 GB of RAM, and the recommended spec goes no higher than a GTX 970 or RX 480. In other words, most gaming PCs built in the last several years already meet or beat what Tom Clancy’s The Division 2 asks for. This guide breaks down the official PC system requirements for Tom Clancy’s The Division 2, the best GPU for each resolution, and complete build recommendations for 1080p, 1440p and 4K.
🛒 Best Price Today on Amazon
Check today’s deals on the products above before you buy. Prices change often, so compare the live price on Amazon.
How Demanding Is Tom Clancy’s The Division 2?
Tom Clancy’s The Division 2 is not a demanding game by current standards. It is an established, well-optimised online shooter, and its published requirements reflect that: the minimum is a GeForce GTX 780 or Radeon R9 280X with 3 GB of VRAM, 8 GB of system RAM and 77 GB of storage, while the recommended tier only moves up to a GeForce GTX 970 or Radeon RX 480 with 4 GB. Both tiers list 8 GB of RAM and the same 77 GB of disk space, and DirectX 11 is the minimum with DirectX 12 recommended. The one hard floor is CPU instruction support: the processor must offer SSE 4.2 and AVX, which rules out pre-2011 chips but is satisfied by everything modern. In practice, an entry-level current card such as the GeForce RTX 5060 or Radeon RX 9060 XT clears the recommended spec with room to spare, and even a GTX 1060, RX 580 or GTX 1660 Super-class card from the previous generation sits comfortably above the minimum. The CPU bar is just as low — the recommended chip is a 2014-era Core i7-4790 — so a modern 6-core processor has plenty of headroom, and your budget is better spent on the graphics card and an SSD. Always check the game’s official store page for the exact published requirements.
ASUS Prime GeForce RTX 5070 12GB GDDR7 OC Edition Gaming Graphics Card | SFF-Ready, PCIe 5.0, HDMI/DP 2.1, 2.5-slot, Axial-tech Fans, Dual BIOS
Picked as a relevant option in this category.
View on AmazonASUS TUF Gaming GeForce RTX™ 5080 16GB GDDR7 OC Edition Graphics Card | PCIe 5.0, HDMI/DP 2.1, 3.6-slot, Military-grade Components, Protective PCB Coating, Axial-tech Fans
Picked as a relevant option in this category.
View on Amazon
ASUS Prime GeForce RTX 5060 8GB GDDR7 Gaming Graphics Card | PCIe 5.0, HDMI/DP 2.1, 2.5-slot, Axial-tech Fans, Dual BIOS
Picked as a relevant option in this category.
View on Amazon
ASUS Dual GeForce RTX 3050 6GB GDDR6 OC Edition Gaming Graphics Card
Picked as a relevant option in this category.
View on AmazonTom Clancy’s The Division 2 Official PC System Requirements
| Component | Minimum (official) | Recommended (official) |
|---|---|---|
| OS | Originally released for Windows 7, the game can be played on Windows 10 and Windows 11 OS | Originally released for Windows 7, the game can be played on Windows 10 and Windows 11 OS |
| Processor | AMD FX 6350, Intel Core i5-2500K, or better (SSE 4.2 and AVX support required) | AMD Ryzen 5 1500x, Intel Core i7-4790, or better (SSE 4.2 and AVX support required) |
| Memory | 8 GB RAM | 8 GB RAM |
| Graphics | AMD R9 280X (3 GB), NVIDIA GeForce GTX 780 (3 GB with Shader Model 5.0+), or better | AMD RX 480 (4 GB), NVIDIA GeForce GTX 970 (4 GB with Shader Model 6.0+), or better |
| DirectX | Version 11 | Version 12 |
| Storage | 77 GB available space | 77 GB available space |
Source: the official Tom Clancy’s The Division® 2 Steam store listing (app 2221490), checked October 2026. Publishers can update these specs after patches.
Best GPU for Tom Clancy’s The Division 2 by Resolution
1080p
The NVIDIA GeForce RTX 4060 is far more than 1080p needs in this game — it sits well above the official recommended GTX 970 / RX 480, so it runs Tom Clancy’s The Division 2 at high settings with headroom to spare. If you would rather buy current-generation hardware, the GeForce RTX 5060 and Radeon RX 9060 XT are in the same class, and older cards such as the GTX 1660 Super or RX 580 already meet the recommended spec. At 1080p, upscaling such as DLSS or FSR is a nice-to-have rather than a requirement.
1440p
At 1440p the NVIDIA GeForce RTX 4070 SUPER is comfortably ahead of what Tom Clancy’s The Division 2 requires — remember the recommended card is a GTX 970 — so it leaves plenty of headroom at high settings and plenty left over for heavier games. A more modest modern card such as the Radeon RX 9060 XT or GeForce RTX 5060 Ti is also a sensible 1440p choice here, and mid-range cards from the RTX 30-series and RX 6000-series remain perfectly viable.
4K
4K is very achievable in Tom Clancy’s The Division 2, which is not a game that needs a halo-tier graphics card to render at ultra HD. The NVIDIA GeForce RTX 4070 Ti SUPER is a strong, comfortable option, and cards in the GeForce RTX 5070 / Radeon RX 9070 class are equally well suited to 4K here. Upscaling gives you extra headroom if you want it, but this title does not depend on it the way the most demanding current releases do.
CPU, RAM and Storage for Tom Clancy’s The Division 2
Tom Clancy’s The Division 2 sets a low bar for processors: the official recommended chip is a Core i7-4790 or Ryzen 5 1500X, so almost any modern CPU keeps up. The AMD Ryzen 5 7600 is far more than this game needs and makes sense as a general-purpose gaming CPU that will serve you in other titles, while the AMD Ryzen 7 7800X3D is a premium choice you certainly do not need for Tom Clancy’s The Division 2 alone. Intel fans can opt for the Intel Core i5-14600K, again well beyond the requirement. Whatever you pick, make sure it supports SSE 4.2 and AVX — the game will not run without them — which every current processor does. Memory is equally undemanding: the official figure is 8 GB, and 16 GB is a comfortable amount for a modern gaming PC that also keeps a browser and chat apps open. A kit such as the Corsair Vengeance DDR5 32GB gives you headroom if you would rather not think about memory again for a few years. For storage, the game needs 77 GB of space and an SSD is strongly recommended — an NVMe drive like the Samsung 990 Pro 2TB NVMe SSD cuts load times and smooths out texture streaming, and its capacity leaves room for other games.
Recommended PC Builds for Tom Clancy’s The Division 2
1080p budget build: NVIDIA GeForce RTX 4060 + AMD Ryzen 5 7600 + 16 GB DDR5 — this is already well beyond the official recommended spec, so it runs the game at high settings with headroom left over for newer titles.
1440p sweet-spot build: NVIDIA GeForce RTX 4070 SUPER + AMD Ryzen 7 7800X3D + 32 GB DDR5 + 2TB NVMe SSD — far more than Tom Clancy’s The Division 2 requires (16 GB of RAM is plenty for this game alone), which makes it a good all-round setup rather than a game-specific one.
4K high-end build: NVIDIA GeForce RTX 4070 Ti SUPER + AMD Ryzen 7 7800X3D + 32 GB DDR5 + fast NVMe SSD — a comfortable 4K setup for this game, with upscaling available if you want extra headroom.
Is It Worth Upgrading Your PC for Tom Clancy’s The Division 2?
If your current graphics card is a GeForce GTX 780, a Radeon R9 280X or anything newer, you already meet the official minimum for Tom Clancy’s The Division 2, and a GTX 970 or RX 480-class card meets the recommended spec. That makes an upgrade a question of what else you play rather than of this game alone. The graphics card still delivers by far the biggest jump in gaming performance, so upgrade the GPU first if you have to choose. You do not need a new CPU for this game unless yours lacks SSE 4.2 and AVX support, in which case it will not launch at all. Going from 8 GB to 16 GB of RAM is a cheap upgrade that helps if you keep other apps running, and moving the game to an SSD — or adding one if you are still on a hard drive — noticeably improves load times and texture streaming. Rather than replacing everything at once, target the weakest link in your build for the best value.
Can You Play Tom Clancy’s The Division 2 on a Laptop or Handheld?
Because the requirements are modest, gaming laptops handle Tom Clancy’s The Division 2 well. A laptop with a modern entry-level discrete GPU — something in the GeForce RTX 4050/5050 class or above — sits comfortably past the recommended desktop spec at 1080p, and older laptops with a GTX 1660 or RTX 2060 mobile chip can still run it with settings adjusted. Expect shorter battery life and more fan noise than a desktop, as always. Handhelds need more caution: Tom Clancy’s The Division 2 is an online game with anti-cheat, and handheld support depends on whether that anti-cheat is enabled for the platform, so check the store listing before buying. A Windows-based handheld is the safer bet, while SteamOS devices may not be supported at all. If portability matters, prioritise a device with a capable GPU and pair it with a fast microSD or SSD for storage — the game needs 77 GB, which fills a small drive quickly.
How to Boost FPS in Tom Clancy’s The Division 2
If frame rates are lower than you would like, enable upscaling if your GPU supports it (DLSS on NVIDIA, FSR on AMD, XeSS on Intel) — it is the single biggest performance gain available, and in a game with requirements this modest it is usually more than enough. Beyond that, drop the most expensive settings first — shadows, volumetric effects and post-processing — before lowering overall resolution. DirectX 12 is the recommended API, so make sure your GPU and driver support it and that you are not running the game in its older DirectX 11 mode unnecessarily. Keep your GPU drivers up to date, close background apps, and make sure the game is installed on an SSD rather than a mechanical hard drive. Lowering settings to hit a stable frame rate almost always feels better than chasing maxed-out visuals with stutter.
Frequently Asked Questions
Can my PC run Tom Clancy’s The Division 2?
If your PC has at least a GeForce GTX 780 or Radeon R9 280X-class graphics card with 3 GB of VRAM, a processor that supports SSE 4.2 and AVX such as a Core i5-2500K or FX 6350, 8 GB of RAM and 77 GB of free storage, it meets the official minimum for Tom Clancy’s The Division 2. For the recommended experience you want a GTX 970 or RX 480-class card with 4 GB of VRAM and a Core i7-4790 or Ryzen 5 1500X-class CPU — a bar that most modern gaming PCs clear easily.
Is Tom Clancy’s The Division 2 demanding on PC?
No. Tom Clancy’s The Division 2 is an older, well-optimised title with modest requirements: a GTX 780-class card is the minimum and a GTX 970 or RX 480 is the recommendation. Most gaming hardware from the last several years runs it comfortably at 1080p and 1440p, and 4K is realistic with a mid-range modern card.
What GPU do I need for Tom Clancy’s The Division 2 at 1440p 60fps?
Less than you might expect. The official recommended card is a GTX 970 or RX 480, and a modern mid-range option such as a Radeon RX 9060 XT or GeForce RTX 5060 Ti is comfortably above that. The NVIDIA GeForce RTX 4070 SUPER is far more than 1440p in this game requires, and gives you plenty of headroom for other titles.
How much RAM does Tom Clancy’s The Division 2 need?
The official requirement is 8 GB of RAM at both the minimum and recommended tiers, so 8 GB is enough to play. 16 GB is a sensible amount for a modern gaming PC, though, because it leaves room for a browser, chat apps and other background software while you play. Buying more than that is only worth it if you also run heavier workloads.
Do I need an SSD for Tom Clancy’s The Division 2?
It is not a hard requirement — the official spec only asks for 77 GB of available space — but an SSD is strongly recommended for Tom Clancy’s The Division 2. It cuts load times and helps avoid texture streaming stutter while you move through the city, and an NVMe drive like the Samsung 990 Pro is an ideal choice.
